Product display
Slot-type photoelectric switch SLUR-ADSC series
Summary:
Classification:
Single-channel photoelectric switch
Related Documents:
- Summarize
- Technical data
- Related downloads
-
- Commodity name: Slot-type photoelectric switch SLUR-ADSC series
This product is a sensor device used for detecting the position of the elevator car to determine whether the elevator has reached the specified floor, and its main principle is based on the photoelectric effect.
Applications
This product is used for the position detection of elevator cabins to determine whether the elevator has reached the specified floor. Its main principle is based on the photoelectric effect.
Product Model Selection

Note: The SH-ADS-C model is also applicable to this description.
-
Power Supply Voltage
DC11~30V±5%
Current Consumption
25mA
Detection Distance
24.5mm
Detected Object
>φ2mm, non-transparent object
Detection Channel
Single Channel
Light Source Properties
940mm
Control Output
Load Voltage Max: 60V; Single Channel Drive Current: Max: 200mA; Residual Voltage Max: 0.7VDC
Protection Circuit
Reverse connection protection for power supply, over-voltage and over-current protection at output terminal
Response Time
<1ms
Ambient Light
Incandescent Lamp: ≤4000Lux; Sunlight: ≤100000Lux, sunlight should not directly shine on the light-receiving surface
Ambient Temperature
Operating: -25℃~85℃; Storage: -30℃~100℃
Ambient Humidity
Operating: 35~80%RH; Storage: 35~80%RH
Insulation Resistance
Min: 20MΩ (500VDC)
Insulation Withstand Voltage
500VAC 50/60Hz 1min
Vibration Resistance
10~55Hz, vertical amplitude 1.5mm, each direction X, Y, Z for 2 hours
Shock Resistance
500m/s², each direction X, Y, Z for 3 times
Protection Level
IP40 (IP53, IP65 can be customized)
Shell Material
ABS
Weight
About 80g
Cable
RVV4*0.2, default 2m
Related Products
